 |
| Nov. 30, 2011 |
Launch of Routsis’s RightStart™ helps plastics companies accelerate training initiatives; Employees start enhancing skills immediately through fast implementation and online programs DRACUT, MA - With widening skills gaps becoming increasingly urgent for plastics processors across the country, Routsis Training now offers the RightStart™ process to help plastics companies kick-start their mission-critical training programs. RightStart™ from Routsis, the premier training provider for the plastics industry, is a specialized launch process that begins with an on-site visit to create a custom, training plan specific to each customer and its employees. Routsis training specialists select from a comprehensive array of world-class online courses and advanced process simulators produced in collaboration with experts throughout the industry. The online training is accessible anytime, so participants can go at their own pace. Meanwhile, what they learn is continuously reinforced through hands-on practice in the plant. Routsis also shows how to implement and track each program via a customized online training portal. The RightStart™ process can be applied with a company's existing workforce and computers, enabling employees to start learning and the company to start monitoring progress right away. “At Routsis, we recognize that the training process inherently needs to be hands on, online and ongoing to deliver the best results,” said Andy Routsis, president of Routsis Training. “The RightStart™ process helps fill employee skills gaps quickly and effectively to ensure same-level work performance among employees.” RightStart™ includes everything needed to succeed with a complete training program, all delivered with the efficiency and urgency essential in today's competitive climate: • On-site, fast implementation For more information on Routsis’s RightStart™ process, call (978) 958-0700 Media: for more information, or to set up an interview, please contact Matt Mente at |
| Sept. 16, 2011 |
New Online Training Series on Material Drying Technology DRACUT, MA - A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of its two new online Material Drying Technology courses. The training programs and will provide participants with a better understanding of how polymers are best dried and prepared for reliable processing and inform them of how proper material handling and drying is critical to producing a consistent product and process. Topics covered include: dewpoint measurement, drying procedures and calculations, as well as the different types of dryers used in the industry and their respective advantages and disadvantages. “Material drying is a critical step when processing any plastic material, yet it is misunderstood as to how it affects processing, process repeatability, part mechanical properties and aesthetics,” states Andy Routsis, President of A. Routsis Associates, Inc. “Proper preparation, handling, monitoring and controlling moisture levels results in higher quality parts, higher production yields and consistent processing.” For more information please contact: A. Routsis Associates, Inc. |
| Mar. 2, 2011 |
New Online Training Series on Geometric Dimensioning and Tolerancing DRACUT, MA - A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of its new online Geometric Dimensioning and Tolerancing series. The series consists of four training programs: Basic Principles, Interpreting GD&T Symbols, Form and Orientation Tolerances, and Profile, Runout & Location Tolerances. This four program series builds the ability to read and interpret GD&T symbols. Understanding the international engineering language of Geometric Dimensioning & Tolerancing is essential for communicating in the global marketplace. "This program was specifically produced to meet the needs of personnel that are committed to developing advanced understanding of the international engineering language used to communicate at work every day," states Andy Routsis, President of A. Routsis Associates, Inc. "This program complements our existing Blueprint Reading course and facilitates inspectors and people in the quality departments as it provides a necessary understand of the GD&T conventions." For more information please contact: A. Routsis Associates, Inc. |
| Jan. 14, 2011 |
New Online Training on how to Establish a Scientific Molding Process DRACUT, MA - A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of its new online course entitled Establishing a Scientific Molding Process. This course covers the optimization of each stage in the injection molding process through the use of scientific molding practices. This training program provides participants with in-depth processing information to better prepare them for making appropriate and cost-effective decisions when establishing or improving a scientific injection molding process. This training program will also enhance the knowledge base of all production personnel involved with die setting, mold trials, and process optimization. “A scientific molder is a skilled worker who acts upon facts and data, and does not depend on guesswork,” stated Andy Routsis. “This course was designed for molders to be aware of the history and characteristics of the process, the material, the mold, the machine, and all technology associated within a given application.” For more information please contact: A. Routsis Associates, Inc. |
| Sept. 2, 2010 |
New Online Training Series on Blueprint Reading DRACUT, MA - A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of its new online Blueprint Reading series. The series consists of six training programs and covers Engineering Drawings, Multiview Drawings, Sectional Views, Dimensions and Tolerances, as well as Part Feature Specifications. These training courses will undoubtedly develop a worker’s ability to accurately locate and interpret dimensions and symbols on engineering drawings. The programs are based on ANSI standards and incorporate input from a broad industrial cross-section. The primary audience is production and inspection personnel, supervisors, group leaders, set-up personnel, and others who wish to read engineering and assembly drawings. “This course will strengthen the understanding and efficiency of all those who wish to read engineering and assembly drawings,” states Andy Routsis, President of A. Routsis Associates, Inc. “This course can be easily accessed on the internet by personnel at all levels who wish to expand their Blueprint Reading knowledge.” For more information please contact: A. Routsis Associates, Inc. |
| July 7, 2010 |
A. Routsis Associates, Inc. is now on Facebook® DRACUT, MA - A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the launching of its new Facebook® page. This page provides plastics professionals with important updates and other information relating to plastics training via their Facebook® accounts. “People in our industry, like everyone else, are moving more and more toward social networking sites as a way of staying connected,” states Andy Routsis, President of A. Routsis Associates, Inc. “One of the best things about Facebook® is that it allows you see only the information you want to see without having to sort through junk mail.” Login and visit A. Routsis Associates on Facebook. Facebook is a registered trademark of Facebook, Inc. For more information please contact: A. Routsis Associates, Inc. |
| June 21, 2010 |
Training Provider Creates Website For Cell Phones With Web Browsing Capabilities DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces that it has created a mobile version of its website designed specifically for phones with web browsing capabilities. Any user with a Smartphone can now access our informative website (www.traininteractive.com) in a compact format programmed specifically for the type of handheld device being used – Blackberry, iPhone, Droid, etc. “When someone accesses our website on their Smartphone, the site automatically detects the device and immediately switches to the mobile format and a simplified menu.” states Andy Routsis, President of A. Routsis Associates, Inc. “The text are enlarged so information is easy to access without the frustration of going through complicated menus”. For more information please contact: A. Routsis Associates, Inc. |
| May 24, 2010 |
Access Employee Training Records and Critical Information From Your Smartphone DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, has upgraded its online Learning Management System administrative tools to allow existing online customers to access critical training information from their mobile device. Any A. Routsis Associates customer that’s using an online training portal can use their mobile devices to monitor and update user information, group and department information, and training assignments as needed. “Our customers appreciate the value of using our online training systems and now they can get critical employee training data instantly from their handheld device” states Andy Routsis, President of A. Routsis Associates, Inc. “Our online format has been a hit since employees can access [whenever and wherever they want] and managers love the easy access to the records using their cell phone”. For more information please contact: A. Routsis Associates, Inc. |
| May 5, 2010 |
LEARN HOW TO GET MAXIMUM PERFORMANCE ON YOUR ELECTRIC INJECTION MOLDING MACHINE DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., announces the release of a new online training program, entitled Processing with Electric Injection Molding Machines. This online course will help participants take advantage of their machines with in-depth processing knowledge to better prepare them for making appropriate and cost-effective decisions. Production personnel will learn how to optimize any application running on an electric molding machine by taking a closer look at the following processing strategies; 1st stage filling, 1st stage to 2nd stage transfer, 2nd stage pack, screw delay, screw recovery, screw decompression, cooling time, mold opening, part ejection, mold closing and mold clamping. “The technology and efficiency of electric molding machines have made them the machine of choice.” states Andy Routsis, President of A. Routsis Associates, Inc. “There are some unique differences when processing on electric machines that today’s molders can easily take advantage of.” For more information please contact: A. Routsis Associates, Inc. |
| April 1, 2010 |
ROUTSIS INTRODUCES THE FIRST ONLINE TRAINING PROGRAM SPECIFICALLY FOR ELECTRIC INJECTION MOLDING MACHINES DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., announces the release of a new online training program, entitled Understanding Electric Injection Molding Machines. This online course will provide participants with a better understanding of specific machine functions and alternative machine designs – as well as the many capabilities and benefits associated with electric injection molding machines. The improved efficiency, accuracy and repeatability of electric molding machines, when compared to hydraulic molding machines, are also covered in detail. “Due to their performance and efficiency, most people recognize that all-electric injection molding machines are the future of the industry,” states Andy Routsis, President of A. Routsis Associates, Inc. “With this course, and others that are to follow, we will ensure that processors learn how to take advantage of this great technology.” For more information please contact: A. Routsis Associates, Inc. |
| Jan. 25, 2010 |
NEW ONLINE TRAINING SERIES ADDRESSES DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of two new online training programs, entitled Math for Blow Molders. The two Math for Blow Molders training programs were designed to benefit any personnel associated with blow molding – as mathematics is used throughout the industry on a daily basis in many different capacities. It can be as simple as counting inventory and calculating part tolerances or as complex as calculating the raw material necessary to complete a production run. “These programs were specifically produced to meet the needs of personnel that are committed to developing advanced processing skills that work every day in blow molding operations,” states Andy Routsis, President of A. Routsis Associates, Inc. “These programs complement our existing online blow molding courses as these applications become more complex in both packaging and industrial applications.” For more information please contact: A. Routsis Associates, Inc. |
| Jan. 04, 2010 |
NEW ‘TRAIN THE TRAINER’ WEBINAR SERIES DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of its new Train the Trainer webinar series. This webinar series is available On Demand and offers assistance to Routsis’s dedicated portal customers in effectively training their employees at no additional charge. The Train the Trainer webinar series was designed to benefit management personnel associated with the proper implementation and development of their structured in-plant training programs. Topics include; Developing an In-House Training Plan, Blended Learning Models for Education, Learning & Training, and Monitoring & Quantifying Real-World Training Metrics for Managers. Additionally, Global Certification, retention rates, and the benefits of investing in workforce development are also discussed. “Training must be an ongoing initiative in order for companies to compete in today’s global marketplace. Since all of our online courses are easy to customize – our on-site training assistance gives us the ability to develop complete employee development systems specific to each company’s needs,” states Andy Routsis, President of A. Routsis Associates, Inc. “These on demand webinars allow us to further ensure that our customers are consistently getting the most out of their training investment.” For more information please contact: A. Routsis Associates, Inc. |
| Nov. 16, 2009 |
NEW MATH FOR EXTRUDERS TRAINING SERIES AVAILABLE ONLINE DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of two new online training programs, entitled Math for Extruders. The Math for Extruders training programs were designed to benefit any personnel associated with extrusion – as mathematics is used throughout the industry on a daily basis in many different capacities. It can be as simple as counting inventory and calculating part tolerances or as complex as calculating the raw material necessary to complete a production run. Math skills are also critical when extruders are performing advanced functions, such as determining the force applied to the thrust bearing based on the melt pressure in front of the die. “These programs were specifically produced to meet the needs of personnel that work every day in extrusion and are committed to developing advanced processing skills,” states Andy Routsis, President of A. Routsis Associates, Inc. “Production personnel at all levels can benefit from these courses and can be easily accessed on the internet.” For more information please contact: A. Routsis Associates, Inc. |
| Oct. 13, 2009 |
NEW ONLINE TRAINING FOR EXTRUSION BLOW MOLDING DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of its Extrusion Blow Molding online training programs. The training series was designed, in collaboration with The Society of Plastics Engineers (SPE), and will provide any participant with a thorough understanding of what’s involved in Extrusion Blow Molding. All programs use 3-D animation and actual production footage to demonstrate complex concepts, common procedures, and important safety precautions are stressed throughout the training series. Topics covered within the three interactive programs include; material handling, product testing, extrusion blow molding terminology, part forming, flash removal, startup and shutdown, color changes, troubleshooting part defects, preventive and corrective actions, and many more. These online training programs can be used to train any number of individuals. When training over 30 employees, it is recommended that companies setup a dedicated and customizable training portal to monitor the progress of each employee. “Now anyone can train on extrusion blow molding just by logging in via the internet and companies can take advantage of customizing the training to satisfy plant-specific needs,” states Andy Routsis, President of A. Routsis Associates, Inc.For more information please contact: A. Routsis Associates, Inc. |
| Sept. 18, 2009 |
COMPREHENSIVE ONLINE GAP ASSESSMENT BENCHMARK DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of its online GAP Analysis Test for both single screw and twin screw extrusion. These comprehensive tests assess performance based on an established benchmark – specifically for the extrusion industry. Any computer user can login and participate in this comprehensive eighty-four question examination that benchmarks the extrusion industry in the areas of safety, general machine knowledge, general processing knowledge, plastic materials, tooling, process controls, quality and economics. There is no charge to take the GAP analysis test and upon completion, the results are emailed and accompanied by a suggested training curricula related to the specific areas that need improvement. Companies can also arrange for a more detailed analysis of their workforce. “We are the only company in the plastics industry that benchmarks all areas relating to the performance of production personnel. Since this is a true analysis and covers all production aspects of the extrusion industry, participants are not expected to achieve a perfect score in sections that do not coincide with their area of expertise,” states Andy Routsis, President of A. Routsis Associates, Inc.For more information please contact: A. Routsis Associates, Inc. |
| Sept. 4, 2009 |
UNDERSTANDING PLASTICS INTERACTIVE TRAINING PROGRAM NOW AVAILABLE IN SPANISH DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of a new Spanish online training program, entitled Entender El Plástico (Understanding Plastics). This training program features 3-D animation and high-quality digital video footage from production environments and was produced to benefit any personnel associated with the injection molding industry. Understanding Plastics explains how and why plastics are different and defines how polymers are classified. Other topics covered include; proper material handling, proper drying methods, how regrind is used, and the effects that moisture can have on processing and molded part quality. “This program was produced to give Spanish speaking production personnel a better understanding of what a plastic material is, and insight on how plastics behave during processing,” states Andy Routsis, President of A. Routsis Associates, Inc.For more information please contact: A. Routsis Associates, Inc. |
| July 31, 2009 |
NEW TECHNOLOGY AND TRAINING BLOG AVAILABLE FOR PLASTICS PROFESSIONALS DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of its Plastics Training and Technology Blog. This informative blog is a location for plastics professionals to communicate, discuss, and comment on a wide range of plastics training and plastics technology topics. Some existing topics include; dealing with mold condensation, cushion monitoring, check ring repeatability, proper torque values for clamping molds, and suggested reading for plant managers. Users can browse the forum, click on a topic, and 'Leave a comment' for any entry. To open a new discussion, users can simply email blog@traininteractive.com or call (978) 957-0700. “For years we have been involved with many new technologies and innovations within our industry. Since we spend a considerable amount of time at our customers’ locations – we have learned some of the best methods of implementing training and developing employees’ skills. We felt that this information should be shared and this is why we created our blog.” states Andy Routsis, President of A. Routsis Associates, Inc. Check out http://blog.traininteractive.com directly or easily access the new plastics training and technology blog via A. Routsis Associates’ homepage (www.traininteractive.com). For more information please contact: A. Routsis Associates, Inc. |
| July 08, 2009 |
NEW SCIENTIFIC MOLDING WEBINARS AVAILABLE AT NO COST DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of its Scientific Molding Webinar Video Archive. This comprehensive collection currently consists of six recent multimedia presentations, with topics ranging from Scientific Troubleshooting to Fine Tuning a Molding Process. Each webinar is packed with important, practical information about enhancing molding operations and practicing sound, scientific molding principles. Sign up for our FREE Focused Training Modules located in the Free Training & Resources section located on our home page. By signing up, you’ll be automatically notified of upcoming webinars in which all attendees receive supplemental materials and other special offers that directly relate to the subject matter of each lecture. Every presentation is delivered using Citrix’s GoToMeeting™ and typically lasts about an hour. Check out our upcoming webinar schedule and take advantage of these FREE and informative presentations – all while saving on travel time and associated costs. For more information please contact: A. Routsis Associates, Inc. |
| May 20, 2009 |
COMPREHENSIVE ONLINE GAP ASSESSMENT BENCHMARK FOR INJECTION MOLDERS JUST UPDATED DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of its updated online GAP Analysis Test. This comprehensive test is used to assess performance based on an established benchmark – specifically for the injection molding industry. Any computer user can login and participate in this comprehensive eighty-four question examination that benchmarks injection molders in the areas of safety, general machine knowledge, general processing knowledge, plastic materials, tooling, process controls, quality and economics. There is no charge to take the GAP analysis test and upon completion, the results are emailed and are accompanied by a suggested training curricula related to the specific areas that need improvement. Companies can arrange for a detailed analysis. “We are the only company in the plastics industry that benchmarks all areas that relate to the performance of production personnel. Since this is a true analysis and covers all injection molding production aspects participants are not expected to achieve a perfect score in sections that do not coincide with their area of expertise,” states Andy Routsis, President of A. Routsis Associates, Inc. For more information please contact: A. Routsis Associates, Inc. |
| Mar. 11, 2009 |
TWIN SCREW EXTRUSION TRAINING NOW AVAILABLE ONLINE! DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the online release of its Twin Screw Extrusion training programs. Our Twin Screw Extrusion Series was designed, in collaboration with The Society of Plastics Engineers (SPE) and Polymer Training Ltd. (PTL), to provide training for anyone working in a production environment. All eight programs use animation and actual production footage to demonstrate complex concepts and important safety precautions are stressed throughout the training series. Tailored for Twin Screw Extruders, these training courses provide specific information for profile, pipe, or compounding extruders. Whether you use co-rotating or counter rotating extruders, the information will relate to the equipment, materials, and processes operating at your facility. Pipe or Profile extrusion facilities can also utilize our advanced process simulation software to help further develop the applicable skills and capabilities of their production employees. For more information please contact: A. Routsis Associates, Inc. |
| Mar. 11, 2009 |
SINGLE SCREW EXTRUSION TRAINING NOW AVAILABLE ONLINE! DRACUT, MA – A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the online release of its Single Screw Extrusion training programs. Our Single Screw Extrusion Series was designed, in collaboration with The Society of Plastics Engineers (SPE) and Polymer Training Ltd. (PTL), to provide training for anyone working in a production environment. All eight programs use animation and actual production footage to demonstrate complex concepts and important safety precautions are stressed throughout the training series. Tailored for Single Screw Extruders, these training courses provide specific information for all extruders – from blown film to profile extrusion. Whether you use single stage or vented extruders, the information presented will relate to the equipment, materials, and processes operating at your facility. Blown Film, Pipe, or Profile extrusion facilities can also utilize our advanced process simulation software to help further develop the applicable skills and capabilities of their production employees. For more information please contact: A. Routsis Associates, Inc. |
| Feb. 14, 2009 |
Society of Plastics Engineers Announces Online Training BROOKFIELD, CT– The Society of Plastics Engineers proudly announces an online partnership with A. Routsis Associates, Inc., the premier training provider for the plastics industry. SPE now offers online training packages that feature cutting-edge content from A. Routsis Associates for individuals and global corporations alike – and all training can be accessed on demand! Train anywhere, anytime and take advantage of the 24/7 flexibility with one full year of unlimited access for the following training packages:
• Design Engineer Package (20 online courses) The course entitled An Introduction to Injection Molding is available for free to SPE members for 30 days. (Nonmembers: $97.00*) For more information on any of these online training packages, visit SPE’s new Online Store or call Customer Relations at +1 203 740-5403. * Not a member? Join SPE online before placing your order to take advantage of this offer! |
| Jan. 30, 2009 |
New ‘TRAIN THE TRAINER’ Webinar Series Assists Companies With Employee Development DRACUT, MA - A. ROUTSIS ASSOCIATES, INC., the premier training provider for the plastics industry, announces the release of its Train the Trainer webinar series. These regularly scheduled webinars assist Routsis’s corporate customers in effectively training their employees at no additional charge. he Train the Trainer webinar series was designed to benefit management personnel associated with the proper implementation and development of structured in-plant training programs. Topics include; Developing an In-House Training Plan, Blended Learning Models for Education, Learning & Training, and Monitoring and Quantifying Real-World Training Metrics for Managers. Additionally, Global Certification, retention rates, and the benefits of investing in workforce developed will be discussed. By assisting hundreds of companies over the past six years, Routsis has pioneered on-site training assistance for the plastics companies. “We are the only company in the plastics industry that has been working onsite with our customers to create employee development programs specific to their needs,” states Andy Routsis, President of A. Routsis Associates, Inc. “These webinars allow us to ensure our customers are consistently getting the most out of their training investment.” For more information please contact: A. Routsis Associates, Inc. |
| Dec. 16, 2008 |
Now Any Molder Can Improve Their Skills With This Comprehensive Online Training Program DRACUT, MA– A. Routsis Associates, Inc., the premier training provider for the plastics industry, announces the release of two new online training programs, entitled Math for Molders. The Math for Molders training programs were designed to benefit any production employee – as mathematics is used throughout the industry on a daily basis by virtually everyone. Job functions as simple as counting inventory, calculating part tolerances, and determining production requirements, as well as complex calculations for determining tonnage requirements all utilize basic mathematics. “These programs were specifically produced to meet the needs of personnel that are committed to developing skills that simplify every day tasks at your facility,” states Andy Routsis, President of A. Routsis Associates, Inc. “These programs are unique to the industry and can be easily accessed on the internet.” For more information please contact: A. Routsis Associates, Inc. |
| April 28, 2008 |
New Online Training Programs Complement Master MolderSM Series TRAVERSE CITY, MI– A. Routsis Associates, Inc., a division of RJG Inc., announces the online release of the Intelligent Molder training series. A. Routsis Associates is the only company in the plastics industry to offer interactive training that parallels the curricula covered within RJG’s Master MolderSM Certification Series. The Intelligent Molder Series was designed to provide technicians and process engineers with the applicable tools to properly evaluate both the capability and repeatability of a given injection molding machine, injection mold, or injection molding process. These three courses will greatly benefit any participant of RJG’s classroom-based, Master MolderSM Certification Series – either as a primer or as follow-up training. The nine tests covered in this training series include; the Dynamic Check Ring Repeatability Test, the Load Sensitivity Test, the Platen Deflection Test, the Dynamic Cavity Imbalance Test, the Mold Deflection Test, the Tonnage Calculation Worksheet, the In-Mold Rheology Test, the Gate Seal Worksheet, and the DECOUPLED II Process Sheet. Each in-depth test used to assess the accuracy of a given machine, mold, or process consists of the following sections: · purpose and objectives For more information about the Intelligent Molder Series or to arrange an online viewing of the courses contact: RJG, Inc. / A. Routsis Associates, Inc. Division 3111 Park Drive TEL: (231) 933-8136 |
| April 14, 2008 |
eDART™ Training Now Available Online TRAVERSE CITY, MI– A. Routsis Associates, Inc., a division of RJG Inc., announces the release of the online training program entitled, RJG’s eDART ™. A. Routsis Associates is the only company in the plastics industry to offer training on using the eDART™ process controller. RJG’s eDART ™ was created for production personnel that monitor and optimize injection molding processes equipped with RJG’s eDART™ process controllers. This course will greatly benefit setup personnel, process engineers, machine operators, and managers that use, or plan on using, an eDART ™ system. Any participant of the course RJG’s eDART ™ will be better prepared to establish the following :
· Improved processing methods Topics covered include; an overview of the eDART™ system, software configuration, and an explanation of the following essential screens (Cycle Graph, Cycle Values, Summary Graph, Statistics, Alarm Settings, Process Match Meter, and Velocity to Pressure Transfer). Additional features of the eDART™, such as automated quality control functions and process optimization, are also introduced. For more information about the eDART™ process controller or to arrange an online viewing of the course contact: RJG, Inc. / A. Routsis Associates, Inc. Division 3111 Park Drive TEL: (231) 933-8136 |
| Oct. 3, 2007 |
Plastics Training For All Levels Now Available Online TRAVERSE CITY, MI– A. Routsis Associates, Inc., a division of RJG Inc., announces their most popular interactive training courses are now available online. This development now makes it possible for individuals and global corporations alike to get the training they need on demand. Companies are able to manage their own dedicated training portal, if they so choose, and can be customized to the extent of adding their own training materials. Training is easy to manage and schedule and can take place at a single location or multiple locations spanning across the globe. “A company of any size can now affordably train as many people as they want.” states Andy Routsis, President of A. Routsis Associates, Inc (a Division of RJG, Inc.). “Any company can try it for free to see if it works for them.” To view a detailed price schedule, as well as several training packages created for specific job titles in the industry, visit www.traininteractive.com A. Routsis Associates and RJG, Inc. have also put together packages that combine computer-based training with in-depth, classroom training. For a free demonstration or for more information, please contact: RJG, Inc. / A. Routsis Associates, Inc. Division 3111 Park Drive TEL: (231) 933-8136 Email: pat.hirst@rjginc.com |
| Sep. 25, 2007 |
Free Focused Training Modules For Injection Molders Now Available Online TRAVERSE CITY, MI – A. Routsis Associates, Inc., a division of RJG Inc., has updated their website and released their new series of Focused Training Modules. This free service can easily be obtained by subscribing. By providing these focused modules, companies no longer have an excuse not to train. Any company that signs up will receive a new lesson each week. Every Focused Training Module includes easy-to-follow instructions, a video training lesson, a structured training plan, an on-the-job task sheet, a quiz, and an answer key with detailed explanations. “As a trainer that spends 70% of my time working in molding operations, I see many employees that genuinely want to do a good job.” states Andy Routsis, President of A. Routsis Associates (a Division of RJG, Inc.). “This free training tool will give them knowledge and skills that they can apply .” A. Routsis Associates also offers complete customized training solutions for companies of all sizes that include multiple forms of training including: computer-based interactive training courses, process simulation software, classroom training, as well as structured on-the-job training. RJG, Inc. / A. Routsis Associates, Inc. Division 3111 Park Drive TEL: (231) 933-8136 Email: pat.hirst@rjginc.com |
| May 22, 2007 |
Reduce Scrap & Troubleshooting Times with the New Injection Molding Basics – Spanish Version TRAVERSE CITY, MI – A. Routsis Associates, Inc., a division of RJG Inc., proudly announces the release of the Injection Molding Basics – Spanish Version. The new Spanish series consists of three information packed courses entitled, Máquina, Proceso, and Molde (Machine, Process, and Mold). Narrated and titled entirely in the Spanish language, this series was developed in response to requests by molding facilities in Mexico, Honduras, Guatemala and Puerto Rico. This series is also essential to any American or Canadian company that employs Spanish-speaking personnel. Each course was developed using the knowledge of highly skilled and experienced plastics professionals with an emphasis on safety and part quality. The Injection Molding Basics Series is ideal for new hires, yet also serves as excellent refresher courses for any employee involved in plastics processing; from operators and technicians to management and setup personnel. “The release of this new series complements our existing Spanish products,” explains Andy Routsis, President of A. Routsis Associates, Inc (a Division of RJG, Inc.). “We currently offer an Injection Molding Simulator and twenty six different Safety titles that are narrated and titled entirely in Spanish.” To view a demonstration of the new Injection Molding Basics in Spanish or for a detailed catalog of our Spanish courses, please contact: RJG, Inc. / A. Routsis Associates, Inc. Division 3111 Park Drive TEL: (231) 933-8136 Email: pat.hirst@rjginc.com |
| May 10, 2007 |
Training Course Designed to Get New Hires Up-To-Speed Faster TRAVERSE CITY, MI– A. Routsis Associates, Inc., a division of RJG Inc., proudly announces the release of a new interactive training program entitled, An Introduction to Injection Molding. This training course will provide participants with a general introduction to the plastics industry and focuses primarily on the day-to-day operations of a typical injection molding facility. An Introduction to Injection Molding was created for newcomers to the injection molding industry or anyone that would like to learn more about plastics. We recommend that new hires take this course before participating in our Injection Molding Basics Series. Topics covered include; an overview of plastics and the industry, general plant safety, material handling, machine components, an introduction to the process, common part defects, and injection mold terminology. An Introduction to Injection Molding is also available in a European market version. Spanish and Mandarin versions are currently in production and will be available soon. To view a demonstration or for more information contact: Patricia A. Hirst 3111 Park Drive TEL: (231) 933-8136 Email: pat.hirst@rjginc.com |
| June 19, 2006 |
RJG Acquires Leading Training Provider A. Routsis Associates CHICAGO, IL – RJG, Inc., the industry leader in process control, cavity pressure technology and advanced process training is pleased to announce that they have acquired leading training provider A. Routsis Associates, Inc. “After an extensive evaluation of all the industry training providers, we at RJG decided that Routsis dovetailed seamlessly with our DECOUPLED MOLDING SM and Master Molder SM programs.” explained Matt Groleau , President of RJG, Inc. “With the addition of customizable interactive and advanced web-based training, we now offer both in-plant and off-site training to meet all employee skill levels. RJG can now offer programs available to companies that cannot justify sending employees off site for training, delivering the most complete, cost effective training solution available.” As an independent division of RJG, A. Routsis Associates will combine in-house training utilizing customizable interactive training, advanced process simulation, plant specific on-the-job exercises, and GSPC (Global Standards for Plastics Certification) with instructor-led DECOUPLED MOLDING SM and Master Molder SM training at RJG’s world class training facility. Andy Routsis, President of A. Routsis Associates stated “By offering such a wide ranging blend of training methods, companies of all sizes will have all the necessary tools required to develop a fully skilled workforce.” Patricia A. Hirst 3111 Park Drive TEL: (231) 947-3111 Email: pat.hirst@rjginc.com |
| June 3, 2005 |
NEW PROGRAM PROVIDES TRAINING WITH TEETH INDIANAPOLIS , IN - Each year, DeKalb Molded Plastics Co. sets aside training funds for its employees. They attend sessions on safety, lean manufacturing and general manufacturing improvements. But the question, said Rick Walters, vice president of operations for Butler, Ind.-based DeKalb, has been whether the sessions have provided real substance in improvements. Now, the company has become one of the first to sign on to an internationally recognized program that provides accreditation for machine operators and tracks the resulting improvement. “Sometimes we get so involved in making plastic parts that we forget that the people who are going to be spending up to 12 hours actually making them also want to have some way of advancement,” Walters said May 24 at Plastics Encounter in Indianapolis. Mid-America Plastics Partners Inc. in Indianapolis is coordinating the certification program, linked to international standards first developed in England and translated for the United States by A. Routsis Associates Inc. of Dracut, Mass. said Troy Nix, executive director of MAPP. Indiana is serving as a springboard for the Global Standards for Plastics Certification program, with the state and Ivy Tech Community College of Indiana supporting the employee training. Indiana officials approached MAPP more than two years ago wondering if there was some kind of standard training process for the plastics industry, Nix said. The program Routsis found relies on outside certification, and provides employees who pass certain levels with a certificate they can take to other jobs. Carol Krol, human resources manager for Metro Plastics Technologies Inc. of Noblesville, Ind., compares the certification proc-ess with the steps manufacturers go through to win their ISO certification — with intense and specific points each candidate must pass, and which are judged by an independent agency — in this case, MAPP. The first 10 companies now have employees in the certification pipeline, with Indiana chipping in $30,000 worth of training assistance. MAPP is talking with officials in Ohio for backing for a similar program there, Nix said. MAPP’s involvement as a third-party auditor should provide legitimacy to employees taking part in GSPC, he said. Companies outside those states also can take part by funding it on their own. The certification is not a cakewalk, Nix said. The training book itself weighs in at about 3 pounds. There are three separate degree levels, with the vast majority of employees at any given shop capable of passing the first one – but the process still takes about nine months, he said. Maybe half of the employees could move on to level two, which requires them to show skills in a variety of work activities in routine and nonroutine tasks. Only 5 percent make it to the top level. Those are the workers companies covet, Nix said, the ones who can set up any process, think on their feet and trouble-shoot on the spot. “This has teeth,” he said. “Not everybody who goes for it is going to pass this thing.” The steady certification pattern, from level one on up, also provides a continuous training loop, Krol said. The system requires not just book knowledge, but shop-floor knowledge, said Bill Warrenfelz, operations manager for micromolding specialist Makuta Technics Inc., headquartered in Columbus, Ind. “It isn’t just, ‘Do you know the answers?’ It’s, ‘Show me the answers,’ ” he said. DeKalb plans to put 105 employees through the program — from machine operators to warehouse and office workers — because it believes the level of understanding required through the process improves everyone’s performance. Walters said DeKalb can track improved scrap rates and better safety records from the trained employees. “We’re seeing our turnover numbers decrease because the attitude of the [certification] candidates is that they have a sense of ownership in their job,” Warrenfelz said. The employees, meanwhile, can earn college credits through Ivy Tech while also walking away with a certification with their name on it — something with real value should they need to seek another job. “I’m sure some people may see that as us doing training that other companies will benefit from, but while you have the employee, if you can get them to be better for the company, I don’t really see that as being a downside,” Warrenfelz said. To have your own access to news stories like this one, go to http://www.plasticsnews.com. To subscribe to our free headline alert and resin pricing change alert services, go to this URL: |
| Mar. 25, 2005 |
MANDARIN INJECTION MOLDING TRAINING AVAILABLE NOW! DRACUT, MA - A. Routsis Associates, Inc., the premier training service provider for the plastics industry, announces the release of its Mandarin (Chinese) Injection Molding Training Series. “With daily announcements of US companies setting up new plants in mainland China , there is a growing need to train the local workforces. Brand new machines and facilities are useless if your unskilled employees use your assets to create mountains of scrap, while smashing your tooling.” Explains Andy Routsis, President of A. Routsis Associates. “Using the local Chinese dialect, our Mandarin Injection Molding Training Series can teach experienced, as well as new employees, a solid foundation of molding knowledge which can help them reduce scrap, minimize mold and machine damage, and increase quality.” The new Mandarin Injection Molding series consists of three courses: Machine, Process, & Mold . Each course has been developed using the knowledge of highly skilled and experienced plastics professionals with an emphasis on safety and quality. To view a demonstration of the new Mandarin Injection Molding Series , or for more information, please contact:
A. Routsis Associates, Inc. |
| Mar. 4, 2005 |
STAY CURRENT WITH PRACTICAL ONLINE NEWSLETTER DRACUT, MA - A. Routsis Associates, Inc., the premier interactive training provider for the plastics industry, announces the release of “Plastics Training Review” online newsletter. This concise, bi-weekly newsletter provides updates on the plastics industry, technology, and training. “Our newsletter is designed to be a free resource where people can learn about training as well as gain insight on other topics of general interest,” claims Andy Routsis, President of A. Routsis Associates, Inc. For a FREE subscription to the “Plastics Training Review” online newsletter, visit www.traininteractive.com and go to the “Free Training Tools” section of the home page. For more information please write, call, email or fax:
A. Routsis Associates, Inc. |
| Feb. 11, 2005 |
REDUCE COSTLY MACHINE DOWNTIME WITH THE NEWLY UPDATED INJECTION MOLDING HYDRAULICS TRAINING DRACUT, MA - A. Routsis Associates, Inc., the premier training service provider for the plastics industry, announces the release of its new and improved Injection Molding Hydraulics training series. “Since the hydraulic system is the heart and life blood of over three quarters of all injection molding machines in North America ,” explains Andy Routsis , President of A. Routsis Associates, Inc. “employees who are trained in hydraulic maintenance, not only reduce machine downtime and costly equipment damage, they eliminate machine issues that are causing persistent scrap rates and excessive troubleshooting times. A healthy hydraulic system is needed for a molding machine to attain six sigma quality standards.” This newly updated and improved Injection Molding Hydraulics training series teaches the importance of hydraulics in the injection molding process, through understanding the theory of hydraulics and reading hydraulic prints. For more information please write, call, email or fax:
A. Routsis Associates, Inc. |
| Feb. 11, 2005 |
REDUCE SCRAP & TROUBLESHOOTING TIMES WITH EXPANDED BASIC INJECTION MOLDING TRAINING DRACUT, MA - A. Routsis Associates, Inc., the premier training service provider for the plastics industry, announces the release of its new, expanded and improved training series; Basic Injection Molding. “Over the years, thousands of companies have used the original Basics Series to decrease downtime, reduce scrap, and improve productivity. Advances in technology have allowed us to upgrade this training tool with detailed graphics and much more information on the latest molding technologies. Although we call it the Basic Series, it will benefit and challenge even the most seasoned processor while laying a solid foundation of molding knowledge for anyone.” explained Andy Routsis, President of A. Routsis Associates, Inc. The new Basic Injection Molding series consists of three courses: Machine, Process, & Mold . Each course has been developed using the knowledge of highly skilled and experienced plastics professionals with an emphasis on safety. For more information please write, call, email or fax:
A. Routsis Associates, Inc. |
| Jan. 20, 2005 |
TRAINING SUCCESS AT MAMCO ONEONTA, NY - MAMCO, a leading provider of custom injection molding services, has obtained the services of software maker A. Routsis Associates to launch a state-of-the-art workforce training program improving operational efficiencies and streamlining communication across its divisions. The training program is part of a larger effort by the State of New York to increase the number of highly skilled laborers across the state. In 2004 the state awarded MAMCO a grant to pay for the cost and implementation of the training program. “The training software covers everything from the entry-level employee to the highest position – machine operators, quality associates, tool and die making, and sales,” said Joel Stanley, MAMCO’s production manager. Different levels of training are administered depending on an employee’s position. Generally, entry-level staff receive approximately six hours of training to become certified in their specific area of expertise. Stanley, on the other hand, will take closer to 70 hours of training as a member of the management team. The program is administered in hour-long video segments, with each segment followed by a review and test. Once a trainee successfully passes a test, he or she can move on to the next training segment. So far, about a quarter of MAMCO’s workforce has successfully completed the training, with 100 percent completion estimated for later this year. “One of the biggest things we’ve noticed is that it gives us uniformity and consistency in the terminology we use and in the way we do things,” Stanley said. MAMCO will be eligible for a state reimbursement covering the costs of training once all employees are fully trained. Stanley said the program has been instrumental in helping staff in different divisions better understand MAMCO’s business goals. “The goal is to have a more skilled workforce,” he said. “I would say that it has been very successful.” Based in Oneonta, New York, MAMCO is a premier supplier of custom-manufactured injection molds for customers worldwide in the automotive, electronics, semiconductor, medical, computer, telecommunications, military, aerospace and consumer products industries. National and global clients include Teradyne, Harley-Davidson, Delphi/Delco, 3M and Siemens. Contact MAMCO: MAMCO |
| Jan. 19, 2005 |
DEVELOP SKILLED, CONFIDENT WORKERS… DRACUT, MA - A. Routsis Associates, Inc., the premier interactive training provider for the plastics manufacturing industry, announces technological capabilities which will allow companies to run interactive plastics training solutions through both Local Area Networks (LAN) as well as Wide Area Network (WAN). Recent advances in computer network speed are now allowing businesses to stream these large, digital video and 3-D animation files off of a central server to individual client PCs rather than locally through individual CD-ROM drives. Training record databases can also be stored on the same server. “We’ve been able to offer this technology for many years, but low bandwidth has constantly kept companies from being able to take advantage of it” said Andy Routsis, President of A. Routsis Associates. Any company with a high-speed computer network can easily take advantage of A. Routsis Associates’ capabilities. For more information please write, call, email or fax:
A. Routsis Associates, Inc. |
| Jun. 10, 2004 |
NEW EURO-US PLATFORM FOR POLYMER TRAINING A new partnership has been agreed between Polymer Training UK Ltd (PTL) Europe’s foremost provider of educational services for plastics and A. Routsis Associates Inc. (Routsis) the plastics industry’s premier provider of interactive training and services. PTL and Routsis have worked with each other since 1997, but this new partnership formalizes the relationship and provides greater strategic direction. The agreement will lead to both organizations expanding their portfolio of computer based training and advanced simulation software by offering the products of the other, the joint development of new computer based programs, and the distribution of PTL classroom based training systems by Routsis in the US and Asia. “This is a very exciting development,” said Raymond Clarke, Chief Executive of PTL. ’The agreement gives PTL the opportunity to offer a far wider range of services to its existing clients, broaden its geographical markets and reduce the cost of developing state of the art learning materials through co-operation. Our target is to be a global player in what is now a global industry and this agreement is particularly important in relation to that key objective.’ In welcoming the agreement, Andy Routsis, President of A. Routsis Associates, Inc. stated “This partnership will dramatically increase the presence and exposure of Routsis in Europe and the Middle East , and provide a route to market for our highly acclaimed CD-ROM and internet based training. Most importantly, we (PTL and Routsis), will be able to provide the most complete line of commercial and educational training solutions to the ever-growing international plastics forum.” For more information on how solutions from Polymer Training UK Ltd. and A. Routsis Associates, Inc. can increase the skills and confidence of your employees or expand your educational curricula please contact Caroline Farrell at PTL +44 1952 587020 (c.farrell@ptlonline.org) or Andy Routsis at 978 957 0700 (andyr@traininteractive.com). |
| Mar. 26, 2003 |
WORKLINKS TO PLASTICS PROGRAM NAMED “BEST MODEL” BY THE COMMONWEALTH OF MASSACHUSETTS’ GOVERNOR’S TASK FORCE FITCHBURG, Massachusetts, USA - Local area workforce development provider, Twin Cities Community Development Corp. announced that its Worklinks to Plastics program was named “best model” to reform adult educating and training. This program provides work-ready training, job development and placement to area participants working in the plastics industry. This program consists of Routsis Interactive Training, a self-paced computer based training course, 40 hours of hands-on training at Mount Wachusett Community College and leadership/supervisory skills training in a classroom environment. Twin Cities will be partnering with A. Routsis Associates at this years Mass Plastics Trade Show Best Western Royal Plaza Trade Center, Fitchburg, MA, March 26-27. “Our Worklinks to Plastics development program provides work-ready training to area workers. The program also provides job development/placement supported by local partnering companies,” says Mike Condon, Director of Twin Cities Community Development Corp. “Incorporating the Routsis interactive training programs has proven to be the key to our high success rates, and have accelerated the training process.” Click here for more information. |
| Jan. 24, 2002 | COMPREHENSIVE NEW TRAINING SERIES ON MOLD DESIGN AND MOLD MAKING DEMYSTIFIES THE TOOL PROCUREMENT PROCESS DRACUT, MA - Leading training provider, A. Routsis Associates, Inc. announces the release of a new interactive CD-ROM training series on Mold Design and Mold Making. This series is designed to familiarize the participant with the many aspects of tool design and construction while revealing the latest technological breakthroughs. Utilizing the resources of the world’s leading experts, tool manufacturers and suppliers, this series is designed for tool designers, mold makers, engineers, part designers, instructors and anyone involved in the tool procurement process. The Mold Design and Mold Making Series familiarizes the participant with the many types of injection molds including specialty tooling, the many machining methods used, and many of the mold components available. This complete series also provides the participant with tool design methodology and a sample mold specification guide for reference. A demonstration CD is available. "We have created the world’s most complete structured interactive training program on mold design and mold making. It usually takes about 200-400 hours to teach someone how to design a mold and now it can be done in about one third of the time," says Andy Routsis, President of A. Routsis Associates, Inc. " The information alone will save companies tens of thousands of dollars, weeks of valuable time and inform even the most seasoned mold designers of new technologies." A demonstration CD on these products is available. |
| Apr. 5, 2001 | NEW INTERACTIVE CD-ROM TRAINING SERIES ON BASIC MEASURING TOOLS DRACUT, MA - A. ROUTSIS ASSOCIATES, INC., announces the release of a new interactive CD-ROM training series on Basic Measuring Tools. This series develops a solid foundation of skills that workers can use across a broad spectrum of applications from steel rules to micrometers and height gauges. It forms the basis for mastering more advanced measuring tasks to ensure that you’ll get the accurate measurements needed for all data-based improvement efforts. With this program, workers will master the essentials of handling, applying and reading the most common gauges on today’s shop floors. The primary audience is production, inspection personnel, supervisors, group leaders, set-up personnel and others who wish to use basic measuring tools. A demonstration CD is available. |
| Jun. 8 , 2000 | RJG, INC. & A. ROUTSIS ASSOCIATES TO DEVELOP DECOUPLED MOLDING™ CD-ROM COURSES TRAVERSE CITY, MI - RJG, Inc. and A. Routsis Associates have announced plans to collaborate on developing an interactive CD-ROM training program based on RJG’s unique DECOUPLED MOLDINGSM technology for processors. RJG, Inc., located in Traverse City, Michigan, provides processing training, consulting services, plant-wide monitoring systems, cavity pressure sensors, and machine control equipment. All of RJG’s products and services are centered on DECOUPLED MOLDINGSM processing techniques. This DECOUPLED MOLDINGSM technique improves process consistency by separating the molding process into three distinct phases: filling, packing and cooling. RJG, Inc. currently provides processing training through seminars and hands-on training. "We look forward to working with A. Routsis Associates in putting the DECOUPLED MOLDINGSM process in an interactive CD-ROM training format that will enhance our existing in-house and on-site training programs."- Matt Groleau, President, RJG, Inc. A. Routsis Associates, located in Dracut, Massachusetts, provides both consulting and training services for plastics companies worldwide. Most of A. Routsis Associates efforts are focused on developing PC based interactive CD-ROM training programs for the plastics industry. These interactive products use a combination of media including 3-D animation and high quality digital video to reinforce understanding of complex concepts. Training programs, which incorporate the DECOUPLED MOLDINGSM process technology, will be integrated into the popular Advanced Processing Series currently provided by A. Routsis Associates. RJG, Inc. and A. Routsis Associates will continue to work together to develop training courses designed to compliment each of their training programs. "By working with RJG, we will be able to provide RJG customers with the latest in interactive training technology, while introducing our customers to this processing technique." -Andy Routsis, President, A. Routsis Associates |
| Jan. 10, 2000 | POLYMER TRAINING RESOURCES & A. ROUTSIS JOIN FORCES TO CREATE NEW TRAINING MIX DES MOINES, IOWA - Two of the nation’s leading plastics industry training companies have announced a joint venture to share resources and provide a broader range of training opportunities. Polymer Training Resources (PTR) and A. Routsis Associates (ARA) have formed a working relationship to provide custom training programs for companies in the plastics industry. "This alliance was formed to give customers the best of both worlds. Combining the multimedia technology of A. Routsis interactive training CDs with PTR’s proven, instructor-based, on-site training meets the future needs of the plastics industry as it continues to expand, and the demand for well-trained personnel increases," said B. David Waters, Business Director of PTR in Des Moines, Iowa. In addition, both companies’ Internet sites (www.polymertraining.com and www.traininteractive.com) are linked to facilitate customer communications and interaction with PTR and Routsis. "This collaboration provides companies in the plastics industry with more training opportunities through one source. Customers can now benefit from PTR’s personal training approach, coupled with our interactive training programs, which provide the latest in 3D animation and simulation technology," commented Andy Routsis, President of A. Routsis Associates of Dracut, Massachusetts. ARA and PTR are working together to produce new training products and services that incorporate the benefits of both companies’ training resources. |